top of page

11 kW three-phase wall-mounted charging station, for homes supplied with 400 V and for condominium parking spaces. Same IP55 and IK10 enclosure as the Ampéa 7, with automatic balancing across the three phases.

The Ampéa 11 uses the compact enclosure of the Ampéa 7 and adapts it to three-phase installations. With 11 kW available, it charges a 60 kWh battery in about six hours, without placing a heavy load on the building's electrical network.

This is the format we recommend for condominiums: the power level stays reasonable for the common-areas distribution board, and the charging station can be controlled by a collective energy manager.

Key features

  • Three-phase charging at 16 A per phase, i.e. 11 kW continuous

  • Type 2S socket with shutters and connector locking

  • Built-in 6 mA DC leakage current detection

  • Control input for off-peak hours or an energy manager

  • Can operate in single-phase mode at 3.7 kW if only one phase is connected

Technical specifications

Specification

Value

Maximum power

11 kW

Power supply

Three-phase 400 V, 16 A per phase

Socket

Type 2S with shutters, compliant with IEC 62196-2

Charging mode

Mode 3 according to IEC 61851-1

Protection rating

IP55

Impact resistance

IK10

Connection cross-section

2.5 to 10 mm²

Warranty

3 years

Installation

The charging station is connected to a dedicated line protected by a 30 mA residual current device and a four-pole circuit breaker. The Tutélis Tétra enclosure brings these protections together, already wired. It is rated for 22 kW: by running the line in 10 mm², you can later upgrade to an Ampéa 22 Pro without reworking the distribution board. As with any charging station over 3.7 kW, installation must be carried out by an IRVE-qualified installer, in compliance with standard NF C 15-100.

Specifications

  • Charging power: 11 kW

  • Power supply: Three-phase 400 V

  • Socket type: Type 2S with shutters

  • Protection rating: IP55

  • Impact resistance: IK10

  • Rating: 16 A

  • Standard: IEC 61851-1

Installation advice

Check your contracted power before installation. In three-phase, 11 kW draws 16 A per phase and most often requires a subscription of 12 kVA or more.

Ampéa 11

SKU: WAT-AMP-11
€829.00Price
Quantity

    Three things to try

    • Change the language and the whole site follows, including menus and product pages.

    • Compare a product page: open a product, then change the language.

    • Charging stations, cables, electrical protection: all product pages are translated into German, English and Italian.

    bottom of page