top of page

22 kW three-phase charging station for company car parks and fleets: RFID badge reader, MID-certified energy meter and remote monitoring via OCPP 1.6 J.

The Ampéa 22 Pro is our wall-mounted charging station designed for professional use. It delivers 22 kW in three-phase mode and identifies each driver by badge, making it possible to allocate consumption between departments, employees or visitors.

Its MID-certified energy meter provides a legally valid reading, essential for rebilling electricity or reimbursing an employee. The charging station connects to a monitoring tool using the OCPP 1.6 J protocol, via Ethernet or Wi-Fi.

Standard equipment

  • RFID badge reader, supplied with five programmed badges

  • MID-certified energy meter, readable on the front panel

  • OCPP 1.6 J communication via Ethernet or Wi-Fi

  • 6 mA DC leakage current detection

  • Dynamic power management across several charging stations, up to sixteen charging points

  • Type 2S socket with shutters and locking

Technical specifications

Specification

Value

Maximum power

22 kW

Power supply

Three-phase 400 V, 32 A per phase

Socket

Type 2S with shutters, compliant with IEC 62196-2

Charging mode

Mode 3 according to IEC 61851-1

Metering

MID-certified meter, class B

Communication

OCPP 1.6 J, Ethernet RJ45 and Wi-Fi 2.4 GHz

Protection rating

IP55

Impact resistance

IK10

Warranty

3 years, extendable to 5 years

Installation

The charging station can be mounted on a wall or on a Stabéo Solo post. It requires a dedicated 10 mm² line protected by the Tutélis Tétra enclosure. Commissioning and configuration of the monitoring system must be carried out by a qualified IRVE installer.

Specifications

  • Charging power: 22 kW

  • Power supply: Three-phase 400 V

  • Socket type: Type 2S with shutters

  • Protection rating: IP55

  • Impact resistance: IK10

  • Current rating: 32 A

  • Standard: IEC 61851-1

Installation advice

Mount the charging station between 1.10 m and 1.30 m above finished floor level, with the badge reader at hand height, and leave 20 cm clear below the enclosure for cable routing.

Ampéa 22 Pro

SKU: WAT-AMP-22P
€1,290.00Price
Quantity

    Three things to try

    • Change the language and the whole site follows, including menus and product pages.

    • Compare a product page: open a product, then change the language.

    • Charging stations, cables, electrical protection: all product pages are translated into German, English and Italian.

    bottom of page