Mode 3 charging cable, Type 2 to Type 2, for connecting any electric vehicle to a public or private charging station. Two power ratings and three lengths to choose from, storage bag included.
The Cordéa T2 is the charging cable you keep in the trunk. It connects the vehicle's Type 2 inlet to any charging station fitted with a Type 2 or Type 2S socket, at home, at the office or on the street.
We make it in two power ratings. The 7.4 kW single-phase version is sufficient for a home charging station. The 22 kW three-phase version suits all charging stations: it allows the maximum power the vehicle accepts to pass through.
What makes the difference
Polyurethane sheath that stays flexible down to -30 °C and does not stiffen in winter
Silver-plated contacts rated for 10,000 mating cycles
Overmoulded handles with a non-slip grip area
Attached protective caps that cannot be lost
Storage bag and hook-and-loop strap included
Choose your version
Version | Conductor cross-section | Recommended use |
7.4 kW single-phase 32 A | 3 × 6 mm² + 2 × 0.5 mm² | Ampéa 7 home charging station |
22 kW three-phase 32 A | 5 × 6 mm² + 2 × 0.5 mm² | Ampéa 11 and Ampéa 22 Pro charging stations and public charging stations |
Technical specifications
Specification | Value |
Connectors | Type 2 male and Type 2 female, compliant with IEC 62196-2 |
Charging mode | Mode 3 |
Rated voltage | 250 V single-phase, 480 V three-phase |
Protection rating | IP55 when plugged in, IP44 with cap closed |
Available lengths | 5 m, 7.5 m and 10 m |
Warranty | 2 years |
A three-phase charging cable works on a single-phase charging point; the reverse limits charging to one phase only. If in doubt, the 22 kW version is the most versatile choice.
Specifications
Plug type: Type 2
Protection rating: IP55
Standard: IEC 62196-2
Installation advice
Choose the length according to the distance between the charging point and the charging flap, with the car parked in either direction, then add one metre of slack.
