top of page

Wall-mounted reel for charging cable: the cable winds around the holder and the Type 2 connector sits in its housing, protected from rain and dust.

The Spiréo puts an end to the cable left in a heap beneath the charging station. This wall holder takes up to 10 metres of coiled cable and keeps the Type 2 connector in a closed housing, contacts facing down.

It is moulded from the same polycarbonate as our Ampéa charging stations, in the same shade, to form a coherent set on the garage or façade wall.

Key features

  • Type 2 connector housing with spring-loaded latch

  • Wide winding groove that respects the cable's bending radius

  • Three fixing points, stainless steel screws and wall plugs supplied

  • Suitable for indoor and outdoor use

Technical specifications

Specification

Value

Capacity

Up to 10 m of 22 kW cable

Compatible connector

Type 2, in accordance with IEC 62196-2

Material

UV-resistant treated polycarbonate

Maximum load

12 kg

Housing protection rating

IP44

Warranty

2 years

Installation

The holder can be fitted in ten minutes on a solid wall. On cladding or a lightweight partition wall, allow for a reinforcement plate.

Specifications

  • Plug type: Type 2

  • Protection rating: IP44

  • Standard: IEC 62196-2

Installation advice

Mount the holder 1.20 m above the ground, on the same side as the vehicle's charging flap, so that the cable can be stowed without crossing the walkway.

Spiréo

SKU: WAT-SPI-01
€79.00Price
Quantity

    Three things to try

    • Change the language and the whole site follows, including menus and product pages.

    • Compare a product page: open a product, then change the language.

    • Charging stations, cables, electrical protection: all product pages are translated into German, English and Italian.

    bottom of page