top of page

Prefabricated reinforced concrete anchor block, with anchor rods and ducts already in place. It replaces formwork poured on site: the charging station can be installed the same day.

The Stabéo Béton eliminates the longest step of a pedestal installation: waiting for the concrete to set. This prefabricated block arrives with its four anchor rods already sealed in and two elbow ducts, ready to receive the cables.

All you need to do is open the excavation, set the block level, connect the ducts to the trench and backfill. The pedestal or charging station can be bolted on straight away.

Key features

  • Compatible with Stabéo Solo and Stabéo Duo pedestals and with the Ampéa Duo 22 charging station

  • Two 63 mm elbow ducts, with separate power and network runs

  • Two lifting rings embedded in the concrete

  • Rod positioning template supplied

Technical specifications

Specification

Value

Dimensions

50 × 50 × 40 cm

Weight

62 kg

Concrete

Class C35/45, reinforced

Anchor rods

4 × M12 stainless steel, 200 × 150 mm centre spacing

Ducts

2 × 63 mm, 90° elbows

Warranty

10 years

Delivery

Because of its weight, the block is delivered on a pallet by a carrier equipped with a tail lift. Unloading takes place at the foot of the truck.

Specifications

  • Standard: NF C 15-100

Installation advice

Place the block on a 10 cm bed of compacted sand and check that it is level in both directions before backfilling.

Stabéo Béton

SKU: WAT-STA-BET
€149.00Price
Quantity

    Three things to try

    • Change the language and the whole site follows, including menus and product pages.

    • Compare a product page: open a product, then change the language.

    • Charging stations, cables, electrical protection: all product pages are translated into German, English and Italian.

    bottom of page