top of page

Galvanized steel post for two Ampéa stations mounted back to back. A single anchor point and a single trench to equip two facing parking spaces.

The Stabéo Duo accommodates two Ampéa wall-mounted charging stations, one on each side. Installed between two parking spaces, it halves the groundwork: one foundation block, one trench, one conduit.

Its widened shaft allows two separate supply cables to pass through. Each charging station thus keeps its own line and its own protection, as required by standard NF C 15-100.

Key features

  • Two mounting faces compatible with the entire Ampéa wall-mounted range

  • Partitioned shaft, one compartment per supply line

  • Access hatch lockable with a tamper-proof screw

  • Same finish and same color as the Stabéo Solo

Technical specifications

Specification

Value

Height

1.40 m

Post section

160 × 100 mm

Material

Hot-dip galvanized steel, 3 mm thick

Finish

Anthracite grey powder coating

Impact resistance

IK10

Fixing

4 M12 studs on a slab or concrete base

Anti-corrosion warranty

10 years

To be provided

Two 22 kW charging stations on the same post require two 10 mm² lines. If the available supply is limited, the dynamic power management of the Ampéa 22 Pro shares the load between the two vehicles.

Specifications

  • Impact resistance: IK10

  • Standard: NF C 15-100

Installation advice

Position the post along the line separating the two parking spaces, 50 cm back from the front edge of the spaces, to protect it from bumpers.

Stabéo Duo

SKU: WAT-STA-D2
€319.00Price
Quantity

    Three things to try

    • Change the language and the whole site follows, including menus and product pages.

    • Compare a product page: open a product, then change the language.

    • Charging stations, cables, electrical protection: all product pages are translated into German, English and Italian.

    bottom of page