Galvanized steel stand for mounting an Ampéa charging station where there is no wall. 1.40 m high, supply cable routed inside the post, four-point anchor plate.
The Stabéo Solo lets you install an Ampéa wall-mounted station at the edge of a parking space, in the middle of a yard or along a fence. The station screws onto the head of the stand, and the supply cable runs up inside the post, out of sight.
The steel is hot-dip galvanized, then powder-coated in anthracite grey. This double protection lasts over time, even in a car park that is salted in winter.
Key features
Holes compatible with Ampéa 7, Ampéa 11 and Ampéa 22 Pro charging stations
Access hatch at the base of the post for the connection
25 × 20 cm anchor plate, four stainless steel studs supplied
Sloped top cover that sheds rainwater
Technical specifications
Specification | Value |
Height | 1.40 m |
Post section | 120 × 80 mm |
Material | Hot-dip galvanized steel, 3 mm thick |
Finish | Anthracite grey powder coating |
Impact resistance | IK10 |
Fixing | 4 M12 studs on a slab or concrete base |
Anti-corrosion warranty | 10 years |
Installation
The stand is fixed to an existing slab or to the Stabéo Béton precast concrete base. Plan for the conduit to come out at the centre of the plate before pouring or positioning the concrete base.
Specifications
Impact resistance: IK10
Standard: NF C 15-100
Installation advice
Anchor the stand to a slab at least 15 cm thick using the four studs supplied, or to a Stabéo Béton base in soft ground.
