Dynamic load shedding module: it continuously measures the building's consumption and adjusts the charging station's power so that you never exceed your supply contract. No more power cuts when the oven starts.
The Tutélis Délest means you don't have to increase your contracted power to charge a vehicle. The module measures the total consumption of the home or premises and leaves the charging station whatever remains available, second by second.
When the oven, the water heater and the heat pump are running at the same time, charging slows down. As soon as one appliance switches off, charging returns to full power.
Key features
Measurement with split-core current sensors, without cutting the main power supply
Compatible with Ampéa 7, Ampéa 11 and Ampéa 22 Pro charging stations
Direct reading of the smart meter's remote information output, when available
Threshold adjustable from 15 to 63 A via rotary coding switch
Connection to the charging station by a simple twisted pair, up to 100 m
Technical specifications
Specification | Value |
Compatible networks | Single-phase 230 V and three-phase 400 V |
Measured current | Up to 63 A per phase |
Sensors | 3 split-core current sensors supplied |
Response time | Less than 2 seconds |
Dimensions | 2 DIN rail modules |
Protection rating | IP20, to be installed in an enclosure |
Warranty | 2 years |
When to install it
Load shedding is useful whenever the combined power of the home and the charging station exceeds the supply contract. This is almost always the case with a 6 or 9 kVA contract and a 7.4 kW charging station.
Specifications
Power supply: Single-phase 230 V, Three-phase 400 V
Protection rating: IP20
Rating: 63 A
Standard: NF C 15-100
Installation advice
Clip the measuring sensors onto the main incoming supply, with the arrow pointing towards the distribution board, and not onto the charging station's line.
