Type 2 surge protector to protect the charging station and the vehicle from atmospheric overvoltages. Pluggable cartridges and end-of-life indicator on the front panel.
The Tutélis Para diverts to earth the surges that travel along the grid during a thunderstorm. It protects the electronics of the charging station, as well as the vehicle's onboard charger, which costs far more to replace than a surge protector.
It is DIN-rail mounted in the Tutélis enclosure or in the sub-distribution board, upstream of the charging station. The same model is used for single-phase and three-phase installations.
Key features
Type 2 surge protector, for installation downstream of the main circuit breaker
Four pluggable cartridges, replaceable without rewiring
Mechanical end-of-life indicator on each cartridge
Remote signalling contact for monitoring
Technical specifications
Specification | Value |
Type | Type 2 according to IEC 61643-11 |
Nominal discharge current | 20 kA |
Maximum discharge current | 40 kA |
Protection level | 1.5 kV |
Dimensions | 4 modules |
Protection rating | IP20, to be installed in an enclosure |
Warranty | 2 years |
When is it mandatory
The NF C 15-100 standard makes a surge protector mandatory in several situations, in particular in areas most exposed to lightning and for buildings supplied by an overhead line. Your installer will check the requirements for your site.
Specifications
Power supply: Single-phase 230 V, Three-phase 400 V
Protection rating: IP20
Standard: IEC 61643-11
Installation advice
Connect the surge protector using conductors totalling 50 cm, as short and as straight as possible: every centimetre counts.
