Pre-wired protection enclosure for a three-phase charging station up to 22 kW: 4-pole 30 mA type B residual current device and 40 A circuit breaker, in an IP65 waterproof housing.
The Tutélis Tétra type B protects a three-phase charging line, from 11 to 22 kW. Its type B residual current device detects all leakage currents, both AC and DC, including the smooth DC currents that a vehicle's on-board charger can produce.
It is the most complete protection: it suits all charging stations, whatever their brand, whether or not they have built-in DC detection.
Box contents
One 4-pole 40 A, 30 mA, type B residual current device
One 4-pole 40 A circuit breaker, C curve, 10 kA breaking capacity
One earth terminal block, one neutral terminal block and the linking busbars
One "Electric vehicle charging" identification label
Two cable glands for cables up to 5 × 10 mm²
Technical specifications
Specification | Value |
Operating voltage | 400 V three-phase + neutral |
Rated current | 40 A |
Residual current sensitivity | 30 mA, type B |
Breaking capacity | 10 kA |
Enclosure | 8 modules, transparent door |
Protection rating | IP65 |
Compliance | NF C 15-100, IEC 62423 |
Warranty | 2 years |
Good to know
The NF C 15-100 standard requires individual residual current protection for each charging point. For an installation with several charging stations, allow for one Tutélis enclosure per station, supplied from a sub-distribution board.
Specifications
Power supply: Three-phase 400 V
Protection rating: IP65
Rating: 40 A
Standard: NF C 15-100
Installation advice
Allow one enclosure per charging station. A type B residual current device must never be installed downstream of a type A or AC residual current device.
